Rail Road Track Pans

• Ultra-Track Pans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.

• Prevent Costly Cleanup and Regulatory Fines

• Modular Design - Center and Side Pans are 53.5" long; containment areas can be easily assembled to any length desired

• All-polyethylene Construction - Rugged Track Pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F

• Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.

• Trucks and other vehicles can drive over Track Pans with grates in place*

• Economical, easy to install.

• Modular Track Pan design can be customized to meet your specific needs.

• Optional Track Pan Covers Keep Rainwater Out of the Pans, Providing Effective Stormwater Management.

• Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded or loaded. Lightweight covers mechanically lock into the polyethylene decking and will not blow off in windy conditions.

• Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.

• Ultra-Track Pans Are Available In Two (2) Models: Track Pans and Grates, No Covers & Track Pans with Grates and Covers

• Low Maintenance — unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.

• Low Cost Installation — Lightweight Track Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.

• Slip Resistant Surfaces — Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.

• Long Work Life — Estimated to perform 20-30 years; longer than fiberglass pans.

• Meets SPCC and EPA Stormwater Management Regulations.

• Also meets New York State Chemical Bulk Storage Regulation Section 599.17c — Secondary Containment for Transfer Stations.

• Installation

• Center Track Pan (Dimensional Drawing)

• Side Track Pan (Dimensional Drawing)

• Below Grade Piping (3" Bulkhead Fitting Installation - Steps 1-5)

• Below Grade Piping (Step 3 - Detailed)

• Rail Height Worksheed(Required infor for all Track Pan orders.)

• Track Pan Regulations

• Click here for more information.